Porting from SimPy 2 to 3¶
Porting from SimPy 2 to SimPy 3 is not overly complicated. A lot of changes merely comprise copy/paste.
This guide describes the conceptual and API changes between both SimPy versions and shows you how to change your code for SimPy 3.
Imports¶
In SimPy 2, you had to decide at import-time whether you wanted to use a normal simulation (SimPy.Simulation), a real-time simulation (SimPy.SimulationRT) or something else. You usually had to import Simulation (or SimulationRT), Process and some of the SimPy keywords (hold or passivate, for example) from that package.
In SimPy 3, you usually need to import much less classes and modules (e.g., you don’t need direct access to Process and the SimPy keywords anymore). In most use cases you will now only need to import simpy.
SimPy 2
from Simpy.Simulation import Simulation, Process, hold
SimPy 3
import simpy
The Simulation* classes¶
SimPy 2 encapsulated the simulation state in a Simulation* class (e.g., Simulation, SimulationRT or SimulationTrace). This class also had a simulate() method that executed a normal simulation, a real-time simulation or something else (depending on the particular class).
There was a global Simulation instance that was automatically created when you imported SimPy. You could also instantiate it on your own to uses Simpy’s object-orient API. This led to some confusion and problems, because you had to pass the Simulation instance around when you were using the OO API but not if you were using the procedural API.
In SimPy 3, an Environment replaces Simulation and RealtimeEnvironment replaces SimulationRT. You always need to instantiate an environment. There’s no more global state.
To execute a simulation, you call the environment’s run() method.
SimPy 2
# Procedural API
from SimPy.Simulation import initialize, simulate
initialize()
# Start processes
simulate(until=10)
# Object-oriented API
from SimPy.Simulation import Simulation
sim = Simulation()
# Start processes
sim.simulate(until=10)
SimPy3
import simpy
env = simpy.Environment()
# Start processes
env.run(until=10)
Defining a Process¶
Processes had to inherit the Process base class in SimPy 2. Subclasses had to implement at least a so called Process Execution Method (PEM) and in most cases __init__(). Each process needed to know the Simulation instance it belonged to. This reference was passed implicitly in the procedural API and had to be passed explicitly in the object-oriented API. Apart from some internal problems, this made it quite cumbersome to define a simple process.
Processes were started by passing the Process and the generator returned by the PEM to either the global activate() function or the corresponding Simulation method.
A process in SimPy 3 can be defined by any Python generator function (no matter if it’s defined on module level or as an instance method). Hence, they are now just called process functions. They usually require a reference to the Environment to interact with, but this is completely optional.
Processes are can be started by creating a Process instance and passing the generator to it. The environment provides a shortcut for this: process().
SimPy 2
# Procedural API
from Simpy.Simulation import Process
class MyProcess(Process):
def __init__(self, another_param):
super().__init__()
self.another_param = another_param
def run(self):
"""Implement the process' behavior."""
initialize()
proc = Process('Spam')
activate(proc, proc.run())
# Object-oriented API
from SimPy.Simulation import Simulation, Process
class MyProcess(Process):
def __init__(self, sim, another_param):
super().__init__(sim=sim)
self.another_param = another_param
def run(self):
"""Implement the process' behaviour."""
sim = Simulation()
proc = Process(sim, 'Spam')
sim.activate(proc, proc.run())
SimPy 3
import simpy
def my_process(env, another_param):
"""Implement the process' behavior."""
env = simpy.Environment()
proc = env.process(my_process(env, 'Spam'))
SimPy Keywords (hold etc.)¶
In SimPy 2, processes created new events by yielding a SimPy Keyword and some additional parameters (at least self). These keywords had to be imported from SimPy.Simulation* if they were used. Internally, the keywords were mapped to a function that generated the according event.
In SimPy 3, you directly yield events. You can instantiate an event directly or use the shortcuts provided by Environment.
Generally, whenever a process yields an event, this process is suspended and resumed once the event has been triggered. To motivate this understanding, some of the events were renamed. For example, the hold keyword meant to wait until some time has passed. In terms of events this means that a timeout has happened. Therefore hold has been replaced by a Timeout event.
SimPy 2
yield hold, self, duration
yield passivate, self
yield request, self, resource
yield release, self, resource
yield waitevent, self, event
yield waitevent, self, [event_a, event_b, event_c]
yield queueevent, self, event_list
yield waituntil, self, cond_func
yield get, self, level, amount
yield put, self, level, amount
SimPy 3
from simpy.util import wait_for_any, wait_for_all
yield env.timeout(duration) # hold: renamed
yield env.event() # passivate: renamed
yield resource.request() # Request is now bound to class Resource
resource.release() # Release no longer needs to be yielded
yield event # waitevent: just yield the event
yield wait_for_any([event_a, event_b, event_c]) # waitevent
yield wait_for_all([event_a, event_b, event_c]) # This is new.
yield event_a | event_b # Wait for either a or b. This is new.
yield event_a & event_b # Wait for a and b. This is new.
# There is no direct equivalent for "queueevent"
yield env.process(cond_func(env)) # cond_func is now a process that
# terminates when the cond. is True
# (Yes, you can wait for processes now!)
yield container.get(amount) # Level is now called Container
yield container.put(amount)
Interrupts¶
In SimPy 2, interrupt() was a method of the interrupting process. The victim of the interrupt had to be passed as an argument.
The victim was not directly notified of the interrupt but had to check if the interrupted flag was set. It then had to reset the interrupt via interruptReset(). You could manually set the interruptCause attribute of the victim.
Explicitly checking for an interrupt is obviously error prone as it is too easy to be forgotten.
In SimPy 3, you call interrupt() on the victim process. You can optionally pass a cause. An Interrupt is then thrown into the victim process, which has to handle the interrupt via try: ... except Interrupt: ....
SimPy 2
class Interrupter(Process):
def __init__(self, victim):
super().__init__()
self.victim = victim
def run(self):
yield hold, self, 1
self.interrupt(self.victim_proc)
self.victim_proc.interruptCause = 'Spam'
class Victim(Process):
def run(self):
yield hold, self, 10
if self.interrupted:
cause = self.interruptCause
self.interruptReset()
SimPy 3
def interrupter(env, victim_proc):
yield env.timeout(1)
victim_proc.interrupt('Spam')
def victim(env):
try:
yield env.timeout(10)
except Interrupt as interrupt:
cause = interrupt.cause
Conclusion¶
This guide is by no means complete. If you run into problems, please have a look at the other guides, the examples or the API Reference. You are also very welcome to submit improvements. Just create a pull request at bitbucket.